Quantitative Log Analysis and Petrophysics

LATAR BELAKANG

Setelah menyelesaikan training ini peserta diharap mampu:

1. Memahami prinsip dasar tentang logging batuan termasuk cased hole logging
2. Melakukan diagnosis sifat-sifat sumuran dan evaluasi reservoir dengan interpretasi hasil logging conventional maupun cased holed logging
3. Membuat analisis dan dapat menentukan kemampuan produksi sumuran dari interpetasi data logging
4. Mengerti prinsip-prinsip modern untuk perhitungan wellsite computed log

PESERTA YANG DIREKOMENDASIKAN

Operator/Sr. Operator/Engineer/Non Engineer/Jr. Geologist

PRE-REQUISITE

• Mempunyai pengetahuan dasar geologi hidrokarbon
• Mempunyai pengetahuan dasar evaluasi formasi dan reservoir hidrokarbon

MATERI TRAINING

Pengertian Tentang Lingkungan Logging Konvensional

• Geometri sumuran hidrokarbon
• Pelaksanaan logging
• Gangguan-gangguan yang terjadi

Evaluasi Hidrokarbon

• Dasar-dasar interpretasi
• Pengaruh invasi lumpur

Zona permeable

• SP Log
• Gamma ray log
• Electromagnetic log

Log untuk Clean Formation

• Resistivity-porosity crossplot
• Identifikasi multimineral

Log untuk Shaly Formation

• Distribusi shale dan clay
• Cation exchange capacity
• Model interpetasi shaly sand
• Metoda dual water

Penentuan Produktivitas Sumuran

• Permeabilitas dan penentuannya
• Saturasi air irreducible
• Multiple formation tester

Wellsite Computed Logs

• Log Rwa
• Porosity overlay
• Resistivity overlay
• SP overlay
• Cyberlook log
• Analysis prolog

Electromagnetic Propagation Log

• EPT log
• ADEPT: The Adaptable Tool
• Interpretation method
• CRIM method
• CTA method
• TPO method
•   Endfire array
• Broadside array
• Deep propagation tool (DPT)

Formation Evaluation in Cased Hole

• Log for cased hole formation evaluation
• Natural gamma ray log
• Neutron log
• Sonic log
• Thermal decay time log (TDT)
• Gamma ray spectrometry tool (GST)
• Cement evaluation
• CBL/VDL measurement
• Compensated cement bond tool
• Cement evaluation tool

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

• Rp. 11.000.000, - / peserta (Jakarta,Bogor)
• Rp. 11.000.000, - / peserta (Bandung)
• Rp. 12.000.000, - / peserta (Yogyakarta,Surabaya)
• Rp. 14.000.000, - / peserta (Bali)
• Rp. 14.750.000, - / peserta (Lombok,Batam,Makasar)
• US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

0811-996-1224 (WA)

021-22830080

CONTACT PERSON

0811-996-1224 (WA)

0812-9679-1324 (WA)

Jadwal Training Online & OfflineTahun 2025:

Desember

• 3-5 Desember 2025, Jakarta
• 10-12 Desember 2025, Bandung
• 17-19 Desember 2025, Surabaya
• 22-24 Desember 2025, Yogyakarta

Jadwal Online & OfflineTahun 2026:

Januari

• 5-7 Januari 2026, Semarang
• 12-14 Januari 2026, Jakarta
• 19-21 Januari 2026, Yogyakarta
• 26-28 Januari 2026, Surabaya

Februari

• 2-4 Februari 2026, Lombok
• 9-11 Februari 2026, Bandung
• 18-20 Februari 2026, Malang
• 24-26 Februari 2026, Jakarta

Maret

• 2-4 Maret 2026, Surabaya
• 10-12 Maret 2026, Jakarta

April

• 6-8 Maret 2026, Bandung
• 13-15 Maret 2026, Bali
• 20-22 Maret 2026, Yogyakarta
• 27-29 Maret 2026, Jakarta

Mei

• 4-6 Mei 2026, Surabaya
• 11-13 Mei 2026, Jakarta
• 18-20 Mei 2026, Yogyakarta

Juni

• 2-4 Juni 2026, Bandung
• 8-10 Juni 2026, Surabaya
• 17-19 Juni 2026, Yogyakarta
• 22-24 Juni 2026, Jakarta

Juli

• 1-3 Juli 2026, Bandung
• 8-10 Juli 2026, Surabaya
• 15-17 Juli 2026, Semarang
• 22-24 Juli 2026, Yogyakarta

Agustus

• 3-5 Agustus 2026, Batam
• 10-12 Agustus 2026, Jakarta
• 18-20 Agustus 2026, Surabaya
• 26-28 Agustus 2026, Bandung

September

• 1-3 September 2026, Jakarta
• 8-10September 2026, Bandung
• 15-17September 2026, Yogyakarta
• 22-24 September 2026, Surabaya

Oktober

• 5-7 Oktober 2026, Semarang
• 12-14 Oktober 2026, Bandung
• 19-21 Oktober 2026, Yogyakarta
• 26-28 Oktober 2026, Surabaya

November

• 2-4 November 2026, Bali
• 9-11 November 2026, Bandung
• 16-18 November 2026, Yogyakarta
• 23-25 November 2026, Jakarta

Desember

• 1-3 Desember 2026, Surabaya
• 8-10 Desember 2026, Jakarta
• 15-17 Desember 2026, Bandung
• 22-24 Desember 2026, Batam

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

Kamimenerima request waktu ,tempat & Fasilitas ,Hubungi kamiuntukinformasilebih lanjut

PVT and Reservoir Fluid Analysis

INTRODUCTION

Hydrocarbon system found in petroleum reservoirs are known to display multiphase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are; liquid phase (crude oil or condensate) and gas phase (natural gases). This course will explain the fundamental of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and illustrate the use of phase diagram in describing he volumetric behavior of single-component, two-component and multi component system.

 Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation. A complete and cohesive independent unit on methods of determining the crude oil physical properties, presents the concept and application of vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details scheme of splitting and lumping of petroleum-fraction.

 Properly understanding the reservoir fluid properties is very significant and are very important steps during the entire life of the oil and reservoir developments and operations. This five-days training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep excellent reservoir and production performance as long as possible.                                     

OBJECTIVES

• Refresh the knowledge of the participants on reservoir fluid properties
• Understand the basic principles of hydrocarbon phase behavior and its application in petroleum engineering
• Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
• Enhance the knowledge on hydrocarbon phase behavior, reservoir fluid properties and application
• Gain additional knowledge on recent technology in reservoir fluid properties calculation and correlation
• Knowledge sharing among the participants and instructors

FEATURING THE FOLLOWING SUBJECTS

1. Basic Phase Behavior

• Single component system
• Two components system
• Multi component system
• Classification of reservoir an reservoir fluids

2. Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction

• General correlation for estimating physical properties of hydrocarbon fraction
• Critical compressibility factors
• Characterizing hydrocarbon heavy fractions
• Determining of physical properties of heavy petroleum fraction from correlation

3. Properties of Natural Gases

• Behavior of ideal gases
• Ideal gas mixtures
• Properties of ideal gas mixtures
• Behavior of real gas
• Effect of non hydrocarbon components of the z-factor
• Correlation for non hydrocarbons
• Correlation of high molecular weight gases
• Direct calculation of compressibility factors
• Compressibility of natural gases
• Gas formation volume factor
• Gas viscosity
• Engineering application of natural gases PVT properties

4. Phase Behavior of Crude Oils

• Crude oil density and specific gravity
• Methods for determining density of crude oils as unknown composition
• Methods for determining density of liquids as unknown composition
• Isothermal compressibility coefficient of undersaturated crude oils
• Density of undersaturated crude oils
• Gas solubility
• Oil formation factor of undersaturated crude oils
• Total formation volume factor
• Total system isothermal compressibility coefficient
• Crude oil viscosity
• Bubble point and surface tension
• Application of the crude oil PVT P
• The material balance equation for oil reservoirs

5. Vapor-Liquid Phase Equilibria

• Equilibrium ratio
• Flash calculation
• Application of equilibrium ratio in petroleum engineering

6. Equation of State

• The general sized form of equation of state
• Application of equation of state for petroleum engineering
• Three-phase equilibrium calculation

7. Splitting Lumping Schemes of Petroleum Fraction

• Splitting schemes
• Lumping schemes
• Simulation of laboratory PVT data by equation of state

8. Physical Properties of Crude Oil Determination

• Density
• Viscosity
• Surface tension
• Flash point
• Pour point
• Sulfur contents
• Basic sediment and water

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

• Rp. 11.000.000, - / peserta (Jakarta,Bogor)
• Rp. 11.000.000, - / peserta (Bandung)
• Rp. 12.000.000, - / peserta (Yogyakarta,Surabaya)
• Rp. 14.000.000, - / peserta (Bali)
• Rp. 14.750.000, - / peserta (Lombok, Batam, Makasar)
• US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

0811-996-1224 (WA)

021-22830080

CONTACT PERSON

0811-996-1224

0812-9679-1324 (WA)

Jadwal Training Online & OfflineTahun 2025:

Desember

• 3-5 Desember 2025, Jakarta
• 10-12 Desember 2025, Bandung
• 17-19 Desember 2025, Surabaya
• 22-24 Desember 2025, Yogyakarta

Jadwal Online & OfflineTahun 2026:

Januari

• 5-7 Januari 2026, Semarang
• 12-14 Januari 2026, Jakarta
• 19-21 Januari 2026, Yogyakarta
• 26-28 Januari 2026, Surabaya

Februari

• 2-4 Februari 2026, Lombok
• 9-11 Februari 2026, Bandung
• 18-20 Februari 2026, Malang
• 24-26 Februari 2026, Jakarta

Maret

• 2-4 Maret 2026, Surabaya
• 10-12 Maret 2026, Jakarta

April

• 6-8 Maret 2026, Bandung
• 13-15 Maret 2026, Bali
• 20-22 Maret 2026, Yogyakarta
• 27-29 Maret 2026, Jakarta

Mei

• 4-6 Mei 2026, Surabaya
• 11-13 Mei 2026, Jakarta
• 18-20 Mei 2026, Yogyakarta

Juni

• 2-4 Juni 2026, Bandung
• 8-10 Juni 2026, Surabaya
• 17-19 Juni 2026, Yogyakarta
• 22-24 Juni 2026, Jakarta

Juli

• 1-3 Juli 2026, Bandung
• 8-10 Juli 2026, Surabaya
• 15-17 Juli 2026, Semarang
• 22-24 Juli 2026, Yogyakarta

Agustus

• 3-5 Agustus 2026, Batam
• 10-12 Agustus 2026, Jakarta
• 18-20 Agustus 2026, Surabaya
• 26-28 Agustus 2026, Bandung

September

• 1-3 September 2026, Jakarta
• 8-10September 2026, Bandung
• 15-17September 2026, Yogyakarta
• 22-24 September 2026, Surabaya

Oktober

• 5-7 Oktober 2026, Semarang
• 12-14 Oktober 2026, Bandung
• 19-21 Oktober 2026, Yogyakarta
• 26-28 Oktober 2026, Surabaya

November

• 2-4 November 2026, Bali
• 9-11 November 2026, Bandung
• 16-18 November 2026, Yogyakarta
• 23-25 November 2026, Jakarta

Desember

• 1-3 Desember 2026, Surabaya
• 8-10 Desember 2026, Jakarta
• 15-17 Desember 2026, Bandung
• 22-24 Desember 2026, Batam

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

 Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Production Optimization Using Nodal Analysis

TARGET & TUJUAN

Setelah menyelesaikan training ini peserta diharap mampu:

1. Memahami prinsip-prinsip dasar perhitungan optimisasi dan control produksi sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan.
2. Melakukan diagnosis sederhana dan mengerti penyelesaian optimisasi dan control produksi dengan analisis nodal.
3. Membuat analisis sederhana terhadap data sumuran minya, gas dan panas bumi, melakukan peramalan kinerja dan merencanakan pengembangannya
4. Melakukan perhitungan-perhitungan kuantitatif sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack sub-surface safety valve pada sumuran, merencanakan pengembangannya dengan memperhitungkan kemampuan masing-masing sumuran.
5. Mempergunakan pengetahuan optimisasi untu aplikasi dalam cara pengangkatan buatan dengan gas lift, submersible pump, sucker rod pump dan hydraulic pump.

PESERTA YANG DIREKOMENDASIKAN

Latar belakang: Operator / Senior operator/ Engineer / Non Engineer

MATERI

Production System Analysis

• Nodal system analysis model
• Nodal system analysis application

Reservoir Performance

• Equations and inflow performance relationship
• Real-time performance of oil wells
• Performance prediction of oil wells
• Real-time performance of gas wells
• Performance prediction of gas wells
• Effect of water production

Pressure Drop of Fluid Flow in Pipes

• General equations and concepts
• Fluid properties; density, compressibility factor, etc.
• Well-flow correlations
• Pipeline flow correlation
• Chokes and valves pressure drop
• Effect of velocity

Total System Analysis

• Tubing design
• Flowline size
• Effect of stimulation
• Chokes and valves
• Effect of completion

Artificial Lift Method

• Gas lift
• Submersible pump
• Sucker rod pump
• Hydraulic pump

Nodal Analysis and Production Optimization

• Pressure drop calculation in steam line
• Pressure calculation in injection wells
• Pressure calculation in production wells
• Total analysis approach for production optimization
• Production optimization application

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

• Rp. 11.000.000, - / peserta (Jakarta)
• Rp. 11.000.000, - / peserta (Bandung)
• Rp. 12.000.000, - / peserta (Yogyakarta)
• Rp. 14.000.000, - / peserta (Bali)
• Rp. 14.750.000, - / peserta (Lombok, Batam, Makasar)
• US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

08119961224 (WA)

021-22830080

CONTACT PERSON

0812-9679-1324 (WA)

0812-9679-1224 (WA)

Jadwal Training Online & OfflineTahun 2025:

Desember

• 3-5 Desember 2025, Jakarta
• 10-12 Desember 2025, Bandung
• 17-19 Desember 2025, Surabaya
• 22-24 Desember 2025, Yogyakarta

Jadwal Online & OfflineTahun 2026:

Januari

• 5-7 Januari 2026, Semarang
• 12-14 Januari 2026, Jakarta
• 19-21 Januari 2026, Yogyakarta
• 26-28 Januari 2026, Surabaya

Februari

• 2-4 Februari 2026, Lombok
• 9-11 Februari 2026, Bandung
• 18-20 Februari 2026, Malang
• 24-26 Februari 2026, Jakarta

Maret

• 2-4 Maret 2026, Surabaya
• 10-12 Maret 2026, Jakarta

April

• 6-8 Maret 2026, Bandung
• 13-15 Maret 2026, Bali
• 20-22 Maret 2026, Yogyakarta
• 27-29 Maret 2026, Jakarta

Mei

• 4-6 Mei 2026, Surabaya
• 11-13 Mei 2026, Jakarta
• 18-20 Mei 2026, Yogyakarta

Juni

• 2-4 Juni 2026, Bandung
• 8-10 Juni 2026, Surabaya
• 17-19 Juni 2026, Yogyakarta
• 22-24 Juni 2026, Jakarta

Juli

• 1-3 Juli 2026, Bandung
• 8-10 Juli 2026, Surabaya
• 15-17 Juli 2026, Semarang
• 22-24 Juli 2026, Yogyakarta

Agustus

• 3-5 Agustus 2026, Batam
• 10-12 Agustus 2026, Jakarta
• 18-20 Agustus 2026, Surabaya
• 26-28 Agustus 2026, Bandung

September

• 1-3 September 2026, Jakarta
• 8-10September 2026, Bandung
• 15-17September 2026, Yogyakarta
• 22-24 September 2026, Surabaya

Oktober

• 5-7 Oktober 2026, Semarang
• 12-14 Oktober 2026, Bandung
• 19-21 Oktober 2026, Yogyakarta
• 26-28 Oktober 2026, Surabaya

November

• 2-4 November 2026, Bali
• 9-11 November 2026, Bandung
• 16-18 November 2026, Yogyakarta
• 23-25 November 2026, Jakarta

Desember

• 1-3 Desember 2026, Surabaya
• 8-10 Desember 2026, Jakarta
• 15-17 Desember 2026, Bandung
• 22-24 Desember 2026, Batam

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Production Optimization and Minimizing Down Time

OBJECTIVES

After participate in this training, the participants will be able to:

1. Summarize the state of the art of production optimization and minimizing downtime technology. In included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of nodal analysis system
2. Summarize the state of the art of production optimization and minimizing downtime technology. In included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of nodal analysis system.
3. Much material of this course has been published previously and is reassembled in this course. However, there is also a considerable amount of new material included that will assist the participant of the course in production optimization and minimizing downtime technology
4. This course, it has also included example problems to illustrate the use of various theoretical solution. Wherever possible, it has not only discussed practical difficulties that one may encounter while using the theoretical solutions, but it has also listed some of the method that one can used to obtain the desired information. It also included description on field histories wherever they were available and trouble shooting for production optimization and minimizing downtime
5. This course is mainly directed to the practicing professionals who deal with production optimization and minimizing downtime technology and field trouble shooting. For managers, the course helps to review the present state of the art. It also outlined some of new method in production optimization exist today. These gaps in technology will be useful for research engineers and research professionals determine the areas of future research

AUDIENCE

Operator / senior operator/ engineer / non engineer

OUTLINE

Production System Analysis

• Nodal system analysis model
• Nodal system analysis application

Reservoir Performance

• Equations and inflow performance relationship
• Real-time performance of oil wells
• Performance prediction of oil wells
• Real-time performance of gas wells
• Performance prediction of gas wells
• Effect of water production

Pressure Drop of Fluid Flow in Pipes

• General equations and concepts
• Fluid properties; density, compressibility factor, etc.
• Well-flow correlations
• Pipeline flow correlation
• Chokes and valves pressure drop
• Effect of velocity

Total System Analysis

• Tubing design
• Flowline size
• Effect of stimulation
• Chokes and valves
• Effect of completion

Artificial Lift Method

• Gas lift
• Submersible pump
• Sucker rod pump
• Hydraulic pump

Nodal Analysis in Specific Field Application

• Pressure drop calculation in steam line
• Pressure calculation in injection wells
• Pressure calculation in production wells
• Total analysis approach

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

• Rp. 11.000.000, - / peserta (Jakarta,Bogor)
• Rp. 11.000.000, - / peserta (Bandung)
• Rp. 12.000.000, - / peserta (Yogyakarta,Surabaya)
• Rp. 14.000.000, - / peserta (Bali)
• Rp. 14.750.000, - / peserta (Lombok,Batam,Makasar)
• US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

081296791324 (WA)

021-22830080

CONTACT PERSON

0811-996-1224 (WA)

0812-9679-1324 (WA)

Jadwal Training Online & OfflineTahun 2025:

Desember

• 3-5 Desember 2025, Jakarta
• 10-12 Desember 2025, Bandung
• 17-19 Desember 2025, Surabaya
• 22-24 Desember 2025, Yogyakarta

Jadwal Online & OfflineTahun 2026:

Januari

• 5-7 Januari 2026, Semarang
• 12-14 Januari 2026, Jakarta
• 19-21 Januari 2026, Yogyakarta
• 26-28 Januari 2026, Surabaya

Februari

• 2-4 Februari 2026, Lombok
• 9-11 Februari 2026, Bandung
• 18-20 Februari 2026, Malang
• 24-26 Februari 2026, Jakarta

Maret

• 2-4 Maret 2026, Surabaya
• 10-12 Maret 2026, Jakarta

April

• 6-8 Maret 2026, Bandung
• 13-15 Maret 2026, Bali
• 20-22 Maret 2026, Yogyakarta
• 27-29 Maret 2026, Jakarta

Mei

• 4-6 Mei 2026, Surabaya
• 11-13 Mei 2026, Jakarta
• 18-20 Mei 2026, Yogyakarta

Juni

• 2-4 Juni 2026, Bandung
• 8-10 Juni 2026, Surabaya
• 17-19 Juni 2026, Yogyakarta
• 22-24 Juni 2026, Jakarta

Juli

• 1-3 Juli 2026, Bandung
• 8-10 Juli 2026, Surabaya
• 15-17 Juli 2026, Semarang
• 22-24 Juli 2026, Yogyakarta

Agustus

• 3-5 Agustus 2026, Batam
• 10-12 Agustus 2026, Jakarta
• 18-20 Agustus 2026, Surabaya
• 26-28 Agustus 2026, Bandung

September

• 1-3 September 2026, Jakarta
• 8-10September 2026, Bandung
• 15-17September 2026, Yogyakarta
• 22-24 September 2026, Surabaya

Oktober

• 5-7 Oktober 2026, Semarang
• 12-14 Oktober 2026, Bandung
• 19-21 Oktober 2026, Yogyakarta
• 26-28 Oktober 2026, Surabaya

November

• 2-4 November 2026, Bali
• 9-11 November 2026, Bandung
• 16-18 November 2026, Yogyakarta
• 23-25 November 2026, Jakarta

Desember

• 1-3 Desember 2026, Surabaya
• 8-10 Desember 2026, Jakarta
• 15-17 Desember 2026, Bandung
• 22-24 Desember 2026, Batam

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut..