Oil & Gas and Water Handling Facilities

ABOUT THE COURSE

After participate this training, the participants will be able to:

1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology and trouble shooting in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes, trouble shooting and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

YOU WILL LEARN

1. A comprehensive discussion of production equipment and practices including artificial lift equipment.
2. Understanding the basic of production techniques and production problems
3. The practical and technical considerations in the design, selection and operation of your down hole and surface production equipment
4. How to maintain safety environmental excellence in production and well service operations

COURSE CONTENTS

1. Gas Handling Facilities

• Introduction to gas handling and facilities
• Gas properties
• Ideal gas
• Real gas

Gas formation volume factor

• Gas compressibility
• Gas-water system
• Gas-condensate system

Gas Reservoir Performance

• Reservoir gas flow
• Gas reserves
• Well completion effect
• Tight gas well
• Gas well testing

Gas Piping System

• Basic flow equation
• Flow in wells and flow in pipelines
• Effect of liquids
• Use of pressure traverse curve
• Liquid removal from gas wells

Gas Compression

• Type of compressors
• Compressor design
• Centrifugal compressor

Total System Analysis

• Tubing and flow line effect
• Separator pressure effect
• Compressor selection

Flow Measuring

• Orifice metering
• Metering system design
• Other metering methods

Gas Condensate Reservoir

• Well testing and sampling
• Gas cycling

Field Operation Problems

• Pressure cumulative production plot
• Hydrate formation
• Sour gas production
• Corrosion control with inhibitors
• Sulfur deposition

Gas Processing

• Field treatment of natural gas
• Gas plant operation
• Gas dehydration
• Gas sweetening

2.  Oil Handling Facilities

Oil Well Surface Production Equipment and Operation

• Oil well equipment
• Oil well production operation
• Well automatic safety device

Oil Gathering System, Manifold and Flowline

• Oil gathering system
• Manifold system
• Flowline sizing and design

Crude Oil and Gas Separation

• Separator and principle of separation
• Design of separator
• Oil dehydration

Principles of Measurement

• Introduction to measurement
• Crude oil measurement
• Gas measurement

Well Test

• Introduction
• Responsibility for test
• Preparation for test
• Types of well test
• Equipment and procedures
• Accuracy of fluid measurement
• Problem in testing
• Type of test
• Water handling facilities

The Chemistry of Water

• Chemical and physical properties
• Water sampling procedures
• Quantitative analysis of oilfield waters
• Water analysis techniques

Water Formed Scale

• Why scale form
• Predicting scale formation
• Mixing waters-compatibility
• Preventing scale formation
• Scale removal methods

Corrosion in Water Injection System and Disposal  System

• Theory of corrosion
• The effect of metal composition
• Effect of water composition
• Forms of corrosion
• Corrosion control methods
• Corrosion inhibitors
• Internal coatings and linings for tubular goods
• Internal tank coatings and cathodic protection
• Non-metallic tubular goods types
• Removal of corrosive gases from water
• Oxygen removal
• Removal of hydrogen sulfide from water
• Removal of carbon dioxide from water
• Oxygen exclusion
• Design to minimize corrosion
• Corrosion monitoring techniques

WHO SHOULD ATTEND

Production engineers and supervisors, Well service engineers and supervisors, Materials, logistic and warehouse personnel, Work over engineers and supervisors.

INSTRUKTUR

Team Konsultan PT Ganesha Inti Persada

WAKTU PELAKSANAAN

3 Hari (dimulai pukul: 09.00-16.00)

INVESTASI (Tidak termasuk biaya akomodasi & penginapan)

• Rp. 11.000.000, - / peserta (Jakarta)
• Rp. 11.000.000, - / peserta (Bandung)
• Rp. 12.000.000, - / peserta (Yogyakarta)
• Rp. 14.000.000, - / peserta (Bali)
• Rp. 14.750.000, - / peserta (Lombok, Batam, Makasar)
• US$ 4780 / peserta (Malaysia)

FASILITAS

Lunch, sertifikat, Modul, Coffee Break, Training kit diselenggarakan di Hotel berbintang

INFO & PROMO

0811-996-1224 (WA)

021-22830080

CONTACT PERSON

0812-9679-1324 (WA)

Jadwal Training Online & OfflineTahun 2025:

April

• 9-11 April 2025, Bandung
• 14-16 April 2025, Jakarta
• 23-25 April 2025, Yogyakarta
• 28-30 April 2025, Surabaya

Mei

• 5-7 Mei 2025, Jakarta
• 13-15 Mei 2025, Yogyakarta
• 21-23 Mei 2025, Lombok
• 26-28 Mei 2025, Malang

Juni

• 4-6 Juni 2025, Jakarta
• 11-13 Juni 2025, Yogyakarta
• 18-20 Juni 2025, Bandung
• 24-26 Juni 2025, Bali

Juli

• 2-4 Juli 2025, Bandung
• 9-11 Juli 2025, Jakarta
• 16-18 Juli 2025, Lombok
• 23-25 Juli 2025, Yogyakarta
• 29-31 Juli 2025, Medan

Agustus

• 6-8 Agustus 2025, Bandung
• 13-15 Agustus 2025, Jakarta
• 20-22 Agustus 2025, Malang
• 27-29 Agustus 2025, Bali

September

• 1-3 September 2025, Bandung
• 10-12 September 2025, Surabaya
• 17-19 September 2025, Jakarta
• 22-24 September 2025, Lombok

Oktober

• 1-3 Oktober 2025, Yogyakarta
• 8-10 Oktober 2025, Jakarta
• 15-17 Oktober 2025, Bandung
• 22-24 Oktober 2025, Bali

November

• 3-5 November 2025, Lombok
• 10-12 November 2025, Jakarta
• 17-19 November 2025, Bandung
• 24-26 November 2025, Malang

Desember

• 3-5 Desember 2025, Jakarta
• 10-12 Desember 2025, Bandung
• 17-19 Desember 2025, Surabaya
• 22-24 Desember 2025, Yogyakarta

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.