LATAR BELAKANG :

• Merupakan salah satu masalah lubang sumur di operasi pemboran
• Menyebabkan timbulnya biaya ekstra yang cukup besar
• Berpotensi menyebabkan hilangnya sebagian atau semua fasilitas pemboran di lapangan karena kick dan  blow out yang tidak terkontrol
• Menunda waktu produksi sumur (POP)

SASARAN :

• Mengetahui gejala kejadian kick dan blow out.
• Mengetahui kerugian akibat kick yang tidak terkontrol atau blow out.
• Mengetahui usaha pencegahan terjadinya blow out.
• Mengetahui cara mengidentifikasi mekanisme kick yang terjadi.
• Mengetahui kronologi terjadinya kick dan blow out dan cara penanggulangannya dengan Well Control.

PESERTA TRAINING :

Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

MATERI TRAINING :

Well Control Introduction

• Introduction to course
• Basic Concepts
•  Liquid Hydrostatics

Gas Behavior and Hydrostatics

• Ideal Gases
• Effect of Temperature
• Real Gases
• Critical Temperature & Pressure
• Pseudo-Critical Temp. and Press.
• Gas Compressibility
• Gas Migration

Kick and Gas Migration

• Density of real gasses
• Equivalent Mud Weight (EMW)
• Wellbore pressure before and after kick
• Gas migration rate – first order approx.
• Gas migration rate – w/mud compressibility

Gas Solubility

• Solubility of Hydrocarbon Gasses in Oil
• Solubility of Non-Hydrocarbon Gasses in Oil
• Solution Volume Factors
• Oil Mud  Recommendations

Pore Pressure Prediction

• Mud Weight and Pore Pressure
• Mud Weight and Fracture Gradient
• Normal Pore Pressure
• ubnormal Pore Pressure
• Abnormal Pore Pressure
• Origins of Pore Pressure
• Bulk Density and Porosity vs. Depth

Drilling Rate and Pore Pressure

• Forces on Subsurface Rock
• d-exponent
• dc-exponent
• Rehm and McClendon
• Zamora
• Comb’s Method
• Bourgoyne and Young’s Method

Other Indicators of Abnormal Pore Pressure

• Moore’s Equation – Drilling rate
• Gas in the Drilling Fluid
• Rock Sample Characteristics
• Use of Surge and Swab Pressure to determine Overbalance
• Changes in Drilling Fluid Properties
• Temperature Indications
• Hole Conditions

Logging While Drilling

• Sonic Travel Time
• Resistivity and Conductivity
• Eaton’s Equations (R, C, Dt, dc)
• Natural Gamma Ray

Fracture Gradients 1

• Allowable Wellbore Pressures
• Rock Mechanics Principles
• Hooke’s Law, Young’s Mudulus, Poisson’s Ratio
• Volumetric Strain, Bulk Modulus, Compressibility
• Triaxial Tests
• Rock Mechanics Principles (con’t.)
• Rock Properties from Sound Speed in Rocks’
• Mohr’s Circle
• Mohr-Coulomb Failure Criteria

Fracture Gradients 2

• Radial and Tangential Stresses near the Wellbore
• Stresses in Rock near Wellbore
• Effect of Anisotropic Stresses
• Onshore vs. Offshore Fracture Gradients
• Fracture Gradients in Inclined Wellbores
• Oil Based and Water Based Drilling Fluids

Fracture Gradients Determination

• Hubbert and Willis
• Matthews and Kelly
• Ben Eaton
• Christman
• Prentice
• Leak-Off Test (experimental)

Kick Detection and Control

• Primary and Secondary Well Control
• What Constitutes a Kick
• Why Kicks Occur
• Kick Detection Methods
• Shut-in Procedures
• Soft and Hard Shut-in
• Water Hammer

Off Bottom Kick

• Slugging of drillpipe
• Hole fill during trips
• Surge and Swab pressures
• Kick detection during trips
• Shut-In Procedures
• Blowout Case History

Control Pressures and Circulation Kill Techniques 1

• Shut-In Pressures
• Weighting Up the Mud
• Driller’s Method
• Wait & Weight Method

 Control Pressures and Circulation Kill Techniques 2

• Wait & Weight Method
• Concurrent Method
• Annulus Pressure Profiles
• Kicks in Oil-Based Mud

Secondary Well Control Complications

• Volumetric Well Control
• Lubrication
• Complications During Conventional Kill
• Techniques to Reduce Annular Friction

Special Well Control Applications

• Underbalanced Drilling
• Well Control in Unconventional Hole Programs
• Casing and Cementing Operations

Equipments

• High Pressure Equipment
• Control System Equipment and Design
• BOP Inspection and Test Considerations
• Low-Pressure Equipment
• Equipment Arrangement: Design and Philosophy
• Casing
• Casing Heads and Spools
• Stack Equipment
• Choke and Kill Line Equipment
• Drillstem Control Equipment

  Offshore Operations

• Equipment Used in Floating Drilling
• Operational Considerations in Floating Well Control
• Shallow Gas Hazards
• Trends in Deepwater Drilling

TRAINER

PT. Ganesha Inti Persada consultant team

DURATION OF TRAINING

3days (effective21^thhours )

INVESTMENT TRAINING (Excluding Accommodation) :

• IDR 10.700.000,-/participant (Jakarta)
• IDR 11.000.000-/participant (Bandung)
• IDR 12.000.000,-/participant (Yogyakarta)
• IDR 14.000.000,-/participant (Bali)
• IDR 14.750.000,-/participant (Lombok)
• USD 4778/participant (Malaysia)

TRAINING FACILITIES

Certificate, Module, Training Kit, Lunch, Coffee Break, held in hotel

INFORMATIONAND PROMO

081296791324 (WA)

021-22830080

 CONTACT PERSON

0811-996-1224 (WA)

0812-9679-1324 (WA)

TRAINING METHOD

Interactive Methods, Presentations, Discussions

Jadwal Online & OfflineTahun 2025:

Februari

• 19-21 Februari 2025, Yogyakarta
• 2628 Februari 2025, Bandung

Maret

• 5-7 Maret 2025, Malang
• 12-14 Maret 2025, Jakarta
• 19-21 Maret 2025, Yogyakarta
• 26-28 Maret 2025, Bandung

April

• 2-4 April 2025, Surabaya
• 9-11 April 2025, Jakarta
• 15-17 April 2025, Yogyakarta
• 23-25 April 2025, Bandung

Mei

• 7-9 Mei 2025, Malang
• 14-16 Mei 2025, Jakarta
• 20-223 Mei 2025, Yogyakarta
• 26-28 Mei 2025, Bandung

Juni

• 2-4 Juni 2025, Bali
• 9-11 Juni 2025, Jakarta
• 16-18 Juni 2025, Yogyakarta
• 23-25 Juni 2025, Bandung

Juli

• 1-3 Juli 2025, Batam
• 7-9 Juli 2025, Jakarta
• 14-16 Juli 2025, Lombok
• 21-23 Juli 2025, Yogyakarta
• 28-30 Juli 2025, Bandung

Agustus

• 4-6 Agustus 2025, Bali
• 11-13 Agustus 2025, Jakarta
• 18-20 Agustus 2025, Yogyakarta
• 25-27 Agustus 2025, Bandung

September

• 2-4 September 2025, Surabaya
• 8-10 September 2025, Jakarta
• 15-17 September 2025, Yogyakarta
• 24-26 September 2025, Bandung

Oktober

• 2-4 Oktober 2025, Bali
• 6-8 Oktober 2025, Jakarta
• 13-15 Oktober 2025, Yogyakarta
• 20-22 Oktober 2025, Semarang
• 27-29 Oktober 2025,Bandung

November

• 5-7 November 2025, Lombok
• 12-14 November 2025, Jakarta
• 19-21 November 2025, Yogyakarta
• 26-28 November 2025, Bandung

Desember

• 1-3 Desember 2025, Surabaya
• 8-10 Desember 2025, Jakarta
• 15-17 Desember 2025, Yogyakarta
• 29-31 Desember 2025, Bandung

Klik link form registrasi https://bit.ly/FormRegistrasiPTGIP

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.